EN1805CMINSA Rev. 5 2021-10
www.cafection.com 800-561-6162
18
SERVICE & INSTALLATION MANUAL - Encore 29
4.3 Unpacking
To remove the unit from the box, carefully cut the straps holding the box in place on the skid.
Remove the top of the packaging, then pull up the unit’s box. Inspect the unit to see if any damage
occurred during shipment.
Some parts and accessories need to be installed on the equipment. Those were placed inside
the machine for shipment. Here is a list of all accessories and parts that should be found in the
machine.
One of the machine’s keys is located at the back of the brewer. A second key is
taped on the filter paper roll, located in the internal waste bin.
Inside the machine:
1. Internal Waste Bin
2. 3/8" Inlet Fitting
3. 3/8" to 1/4" Elbow Inlet Fitting
4. 3/8" to 3/8" Elbow Inlet Fitting
5. Gage Identification Stickers
6. "Milk" Sticker for Soluble Canister
7. Filter Paper Roll
8. Small cleaning brush (18ACC04)
9. Big cleaning brush (16ACC12)
10. Microfiber Cloth
11. Keychain
12. Service & Installation Manual
13. Initial Setup Instructions
14. Deep Cleaning Reference Guide
15. Thumb Nuts (4)
16. Chute Hole Hiding Plate
17. Side Skirts (right and left)
Optional
18. Plastic Chute Kit (Chute Base and
Chute) (17CAB42 & 17CAB43)
18
7
15
8
16
9
17
4
2
In
it
ia
l S
e
tu
p
1
3
