Caen RFID skID, Техническое руководство

Страница: 43 / 105

CONFIGURATION MENU - skID Technical Information Manual 43
Bluetooth Low Energy Options
By setting the COMM INTERFACE to Bluetooth , the window Bluetooth Low Energy Opt ions is enabled:
Warning: To enable the Bluetooth Low Energy it is necessary to set the Bluetooth option in the
COMM INTERFACE and to upload the BLE firmware into the reader's Bluetooth module (see §
BT-BLE switching page 89).
In this section you can set the BLE communication parameters for iOS devices.
This operation is necessary to optimally configure the communication between the Bluetooth module and
the iOS operating system. These parameters are important, since they affect power consumption for both
the reader and iOS device, data transfer speed of the connection, and, in some cases, the stability of the
connection. Default values are:

MIN INTERVAL: 12

MAX INTERVAL: 12

COMM LATENCY: 0

COMM TIMEOUT: 500
Warning: To save the changes click on the SAVE button (check the green dot on the bottom
right side of the sidebar). On the main application window click on File

Disconnect . Power off
the reader, disconnect the USB cable and then power on the reader, the new settings are
active.