EnBOX User’s Manual
EnBOX Power Supply
41
The output connector has the following pin-out:
Pin #
PS1112S
1
+12V
3
nc
4
GND
CAENels also supplies in the same package of all provided power supply
PS1112S a mating un-terminated cable that can be terminated with the desired
connector.
7.4.3
Status LED
On a lateral side of the power supply, two LEDs turn off whenever the +12V is
not correctly regulated on the output cable.
Figure 18:
LED indicators for output voltage
7.4.4
Fixations
On the bottom side of the PS1112S four threaded M3×4mm holes can be used
to fix the power supply to a support. These are indicated in the following
+12V "Power Good” LED