CAE AresAR, Руководство пользователя, Страница: 38 / 63

Using CAE LucinaAR
32 ©2020 CAE 905K472552 v1.1
CAE LucinaAR
The In Experience Chapter controls are as follows:
In Experience Chapter Controls
f. Air Tap Next to go to the first chapter. Here you will be able to view the holographic
manikin.
Note: If the holographic anatomy has a flashing highlight, click on the Info button then
tap on the anatomy that is highlighted. The anatomy or organ will rise and provide an
informative clinical experience. The Info button is not always available, in which case the
button will be disabled.
g. When the chapter is complete, Air Tap Next to play the next chapter. If you need to
replay a chapter, Air Tap Replay .
Note: To select a new SCE, hold up your palm facing you to access the Home button. To
return to the main menu, use the Summon Menu gesture and Air Tap the button on your
wrist.
Multi-User Modes
When a user chooses Multi-User Instructor mode, that user becomes the designated instructor for
the duration of the simulation and has sole control of advancing the SCE chapters using the In
Experience Chapter controls.
The individuals who select the Multi-User Learner function during this time will be able to view the
ongoing SCE from their vantage point but cannot utilize the In Experience Chapter controls.
Instructor
To begin the simulation:
1. On the Select your experience menu:
a. Air Tap Multi-User Instructor .
b. Air Tap Physical Manikin .
c. To start the calibration, select the same SCE that was selected in
Müse.
2. Perform the calibration.
A Hologram Sharing window will appear. When learners are ready, select Start .