CAE Healthcare Fidelis Lucina, Руководство пользователя

Страница: 252 / 390

Using Lucina
224
The Genitourinary System
The simulator allows for the insertion of a 14 Fr urinary catheter and excretion of urine.
The genitourinary (GU) system must be primed prior to use.
IMPORTANT: Use only clear distilled water, distilled water tinted with food coloring, or distilled water
mixed with white vinegar (50/50) inside the mannequin. Administration of any other type of fluid is
NOT supported and may damage the system.
Be sure to clean the system before storing the mannequin.
For more information on cleaning the GU system, see Cleaning the Genitourinary System in the Care and
Maintenance section.
Priming the Genitourinary System
Prior to catheterizing the simulator, the genitourinary (GU) system must be primed.
To prime the GU system:
1. Fill a syringe with distilled water (and clinically appropriate food coloring if
desired).
2. Connect the syringe to the GU filling tool.
3. Plug the GU filling tool into the Urinary port (colored yellow) located on
the torso baffle inside the mannequin.
4. Slowly push in the distilled water until fluid drains into the overflow
reservoir on the GU filling tool (approximately 70 mL +/- 10 mL).
5. Disconnect the GU filling tool from the Urinary port.
6. Store the GU filling tool in a secure location for future use.
For more information on draining and cleaning the GU system, see Cleaning the Genitourinary System in
the Care and Maintenance section.
Inserting a Urinary Catheter
Once the GU system has been primed, catheterize the simulator using a standard 14 Fr urinary catheter
lubricated with cottonseed oil spray.
When the catheter is inserted, simulated urine begins to flow until the internal bladder is empty.
NOTE: The urinary catheter needs to be inserted approximately 4 1/2” to achieve urine flow.