OPERATING INSTRUCTIONS
Resetting the Manual Reset Limit Control
Warranty
How to operate your heater
The room temperature is controlled by a line voltage thermostat
located either on the wall or built-in to the heater.
1. Once installation is complete and power has been restored,
turn the thermostat knob fully clockwise.
2. When the room reaches your comfort level, turn the thermo-
stat knob counterclockwise until the heater turns off. The heater
will automatically cycle around this preset temperature.
3. To reduce the room temperature, turn the knob counterclock-
wise. To increase the room temperature, turn the knob clockwise.
About the Manual Reset Temperature Limit Control
The heater is protected by a temperature-limiting control. The
manual reset temperature limit control is designed to open the
heater circuit when excessive operating temperatures are detect-
ed. The problem must be assessed and the limit must be reset to
resume operation.
For more effective and safer operation and to prolong the life of
the heater, read the Owner’s Guide and follow the instructions.
Failure to properly maintain the heater will void any warranty and
may cause the heater to function improperly.
LIMITED THREE YEAR WARRANTY: Cadet will repair or replace
any Com-Pak Max (CM) heater found to be defective within three
years after the date of purchase.
These warranties do not apply:
1. Damage occurs to the product through improper installation or
incorrect supply voltage;
2. Damage occurs to the product through improper maintenance,
misuse, abuse, accident, or alteration;
3. The use of unauthorized accessories or unauthorized com-
ponents constitutes an alteration and voids all warranties. Refer
to Cadet website or call customer service at 855.223.3887 or
360.693.2505 for list of authorized accessories and components.
4. Cadet’s warranty is limited to repair or replacement.
5. In the event Cadet elects to replace any part of your Cadet
product, the replacement parts are subject to the same warran-
ties as the product. The installation of replacement parts does
not modify or extend the underlying warranties. Replacement
or repair of any Cadet product or part does not create any new
warranties.
If you believe your Cadet product is defective, please contact
Cadet during the warranty period, for instructions on how to have
the repair or replacement processed.
Parts and Service
Visit
cadetheat.com/parts-service
for information on where to
obtain parts and service.
Reduce-Reuse-Recycle
This product is made primarily of recyclable materials.
You can reduce your carbon footprint by recycling this
product at the end of its useful life. Contact your local
recycling support center for further recycling instruc-
tions.
1. Make sure all wires are properly connected
and installation is complete before you turn on
the heater.
2. Do not operate without grill.
3. Do not tamper with the high-temperature safety
shutoff.
Resetting the Manual Reset Temperature Limit Control
If the manual reset limit control has opened the heater circuit due to excessive operating
temperatures, the heater will not work until the manual reset limit button is pressed.
After allowing the unit to cool for at least 10 minutes and resolving the problem causing the limit
to trip (typically the heater is blocked or needs cleaning-see Maintenance Instructions); use a
narrow object such as a ball-point pen to access the manual reset button through the upper-
left center section of the heater grill. Press FIRMLY and be sure to listen and feel for a click,
indicating it has been reset.
Complete installation
After installation, turn your heater to the highest setting and let it run for 30 minutes. Some smoking may occur as the element initially burns off residue
from manufacturing.
If your heater shows signs of overheating, such as glowing red or repeatedly getting unusually hot and shutting off, immediately turn off the circuit breaker
and call us.
If the high-temperature safety shutoff trips more than once a day, replace the heater.
Page 5
Manual
Reset
Limit
Button
