31
WALL - SMALL - STYLE
EN
14.11
CLEANING OF CERAMIC AND STONE PANELS
Some stove models has an external lining made up of ceramic or stone. These pieces are handmade therefore
they could inevitably present crazings, seedinesses, shadings.
To clean ceramic or stone panels use a soft and dry cloth. If using any cleaners this will seep through the crazings
putting them in evidence.
14.12
GASKET REPLACEMENT
In case of deterioration of fire door, hopper or fume chamber gaskets, it is necessary to replace them by an
autorized technician in order to guarantee the good running of the stove.
Use exclusively original spare parts.
14.13
GLASS CLEANING
The glass-ceramic of the fire door is able to stand till 700°C but not to thermal shocks.
The probable cleaning with usual sale product for glass cleaning must be effected at cool glass in order to avoid
explosions.
You should clean the fire door glass every day!
15
IN CASE OF ANOMALY
15.1
ALARMS
Before of every intervention of the Authorized Technician, the same Technician has the duty
to check that the parameters of the mother board correspond with those of the table you
own.
In case of doubts regarding the use of the stove, please call ALWAYS the Authorized
Technician in order to avoid irreparable damages!
ALARM
CAUSE
SOLUTION
INTERVENTION
AL 1 - BLACK
OUT
Power cut during ignition
phase.
Clean the burning pot and switch the stove on again.
AL 2 - EXHAUST
PROBE
Disconnected fume
temperature probe
Have the stove checked.
Faulty fume temperature
probe
Replace the fume probe.
