Cadel EASY-SWEET 3 Скачать руководство пользователя страница 29

Страница: 29 / 40

EASY - SWEET

PANEL ALERT

TYPE OF PROBLEM

SOLUTION

A02

The fire goes off abnormally.

Check the level of pellets in the hopper.

A03 Thermostat

alarms

The temperature of the pellets hopper or the

water temperature exceed the envisioned

safety threshold.

Wait for the cooling stage to end, cancel the alarm

and restart the boiler setting the fuel loading at

minimum (SETTINGS menu - Pellet Recipe).
Check that dust does not clog the aeration grid on

the stove back.
If the alarm persists, contact the service centre.

Check if the room fan works properly (if present).

A04

Smoke overheating.

The set smoke threshold has been exceeded.

Reduce pellets loading (SETTINGS menu - Pellet

Recipe).

A05 Pressure

switches alarm

Flue gas pressure switch trip.

Check for chimney obstructions/fire door opening,

pellet tank opening, gasket seals, side fire ducts

cleaning.

A08

Abnormal smoke fan operation.

If the alarm persists, contact the service centre.

A09

Smoke probe faulty.

If the alarm persists, contact the service centre.

SERVICE

Routine maintenance alert (it does not block

the system).

When this flashing message appears upon start-up, it

means that the preset operating hours have elapsed

before maintenance. Contact the service centre.

13.12

ALARM RESET

To reset the alarm you must keep the 1 (ESC) button pressed for some time. The stove performs a check to

determine whether the warning cause is still present.

If this is the case, the warning will be shown again, otherwise the stove will switch to the OFF position.

If the warning is still present, contact a service centre.

MAINTEINANCE

14.1

INTRODUCTION

For a long working life of the stove, have a periodic cleaning of the stove as described in the following paragrafs.

•

Fume outlet pipes (fume c chimney flue + chimney pot) must always be cleaned, scrubbed and

checked by an authorized technician in compliance with local regulations, with the instructions of the

manufacturer and those of your insurance company.

•

If there are no local regulations and no instruction from your insurance company, it is necessary to have your

fume pipe, chimney flue and chimney pot cleaned at least once a year.

•

It is also necessary to have the combustion chamber, motors and fans cleaned and to have the gaskets and

the electronical elements checked at least once a year.

All these operations must be planned in time with your Autorized Technical Assistance

Service.

•

After a long ineffective time, before turning on the stove check if there are obstructions in the fume exhaust.

•

If the stove had been using continuously and intensely, the whole system (chimney included), must be

cleaned and checked more frequently.

•

In case of replacement of damaged pieces please ask for the original spare part at the Autorized Retailer.

14.2

BURNING POT AND ASH TRAY CLEANING

The burning pot and ash tray cleaning must be executed at least every 2 days.

•

Open the door.

Содержание EASY-SWEET 3








































Результаты поиска

Содержание EASY-SWEET 3

Отзывы:

Похожие инструкции для EASY-SWEET 3

Бренды по названию

Популярные бренды

Cadel EASY-SWEET 3, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание EASY-SWEET 3

Отзывы:

Похожие инструкции для EASY-SWEET 3

Бренды по названию

Популярные бренды