I.
G
ETTING
S
TARTED
__
Powering up the CaddyTrek
1.
If using Remote Control (RC) mode, press
the power button on R3 and handset at
the
SAME TIME.
Note: If you DO NOT press the power
button on R3 and handset at the same
time, all four lights on handset will light
up green and you then pair the handset manually. See
instructions below.
2. If only using Follow (FL) mode, no need to power on handset.
Pairing and Synching Handset to CaddyTrek
1.
TURN OFF the CaddyTrek and the Handset.
2.
TURN ON the CaddyTrek and within 5 seconds, TURN ON the
handset.
3.
Immediately press and hold the STOP button while repeatedly
pressing the UP button.
4.
When you hear beeps from handset, you have successfully
paired your handset with your unit.
PLEASE NOTE:
There may be times when the handset will lose connection to the
CaddyTrek, usually after first powering on the CaddyTrek or after
replacing the battery.
Should the handset and CaddyTrek lose connection with each
other, they will need to be re-synched.
The entire re-synching process should only take about 10
seconds. It may be necessary to restart the process if too much
time elapses between turning on the unit and the handset.
Watch Video - Scan QR Code
Pg. 4
