Cadac CDC FIVE Скачать руководство пользователя страница 70

Страница: 70 / 78

Cadac CDC five_02-01-2020_Rev-7.docx

Page. 70 / 78

System Functions

Waves

SoundGrid

Interface

Waves

SoundGrid

is a proprietary high-speed digital audio transport protocol with a capacity of 64 bi-

directional channels. The CDC five is fitted with a SoundGrid

interface card, accessible on the rear

panel via three RJ45 network connectors. Any one of these may be connected to an external computer

(with the appropriate Waves

drivers loaded) to perform multitrack recording (with Waves

SoundGrid

Studio installed on the external computer and appropriate Waves® license) and playback.

51: Waves

SoundGrid

Interface

A range of optional Waves

servers are also available from Waves

which can be used to host the full

range of Waves

plug-in signal processing.

See the Waves

website

www.waves.com

for further information regarding Waves

, SoundGrid

Waves

Tracks Live

, servers and installation.

CDC five Local I/O Mapping and Waves

In the Input / Output tables, shown

over the page, all the “slots” in blue are shared.

Only one item out of each pair can be selected at a time. Once an item is selected the alternative option

will be greyed out in the assignment window.

Note: There are no Waves

outputs on slots 63 and 64, these slots are dedicated to the headphone

output by default - however these can be re-allocated to Waves

Содержание CDC FIVE















































































Результаты поиска

Содержание CDC FIVE

Отзывы:

Cadac CDC FIVE, Обзор аппаратуры, Страница: 70 / 78

Результаты поиска

Содержание CDC FIVE

Отзывы: