Cabletron Systems SmartSwitch 6500, Инструкция по установке и настройке

Страница: 23 / 62

SmartSwitch 6500 Installation and Setup Guide 2-5
Switch Installation Switch Installation and Assembly
Note If any of these items are missing, contact Cabletron Global Support Center
immediately.
2.2 SWITCH INSTALLATION AND ASSEMBLY
The following is a list of steps for assembling your SmartSwitch 6500. Refer to Figure 2-7 for proper module
placement.
2.2.1 Mounting the Chassis
1.
Find someone to assist you. The SmartSwitch 6500 chassis is heavy enough to make this a
two-person task.
2.
Select a spot on a standard 19 inch equipment rack that provides at least two inches of air space
above and below the chassis. This is necessary for proper ventilation and heat dissipation.
3.
Secure the SmartSwitch 6500 to the equipment rack using the screws provided with the equipment
rack. The chassis is secured by ten screws, five screws per side (see Figure 2-3).
Figure 2-3 Rack mounting the SmartSwitch 6500 chassis
PS1
PS2
CSM
TSM/CPU
TSM
10
9
8
7
6
5
4
3
2
1
Install
Mounting
Hardware
(10 Places)
Rack Mount
Chassis