42
42
8.2
Monitor Mode
Monitor Mode
offers the option of checking incoming control sequences at an interface. The commands are printed out
as text. In addition, a corresponding error message is printed out immediately after an error occurs.
The printout occurs using the heat level and print speed specified in the
Setup > Printing
menu.
i
Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Start menu.
Select
Diagnostics > Monitor Mode
.
Send print jobs.
Select
to cancel the printout or switch to the
Ready
mode.
Example:
Monitor Mode
Wed Aug 14 10:28:12 2019
cab SQUIX 4/300MP
Firmware V5.27 (Jul 25, 2019) - #164162036456
Figure 21 Example label printed normally (left) and in
Monitor mode
(right)
The control characters (ASCII-Code 00...31) are presented in stylized design.
e.g. :
L
F
: Code 10 (0A) - line feed
C
R
: Code 13 (0D) - carriage return
Содержание SQUIX Series
Страница 1: ...cab Label Printers Configuration Manual...
