CAB M4, Руководство оператора

Страница: 81 / 132

81 cab Produkttechnik GmbH & Co KG
M4 9. Test Options
9. Test Options
Overview
The printer is equipped with several test options. These options make it
possible for the user to understand something about :
- important configuration parameters
- the fonts available in the printer
- important hardware components of the printer and connected peripheral
devices
- the quality of the print image and the condition of the printhead
- label data sent from a computer.
Seft Test Printout
To prepare for self test printout, load media (labels, continuous paper) and a
transfer ribbon (if applicable), which extends over the entire print width of the
printer.
NOTICE !
During the selft test printout, the printer will not sense any label gaps.
Therefore continuous paper works best for the print.
To initiate a self test printout, press the key when switching on the printer
and keep it pressed down for 1 second.
After that the following three test prints will be generated one after the other :
- Status print
- Font list
- Device list
For the self test printout, the print speed and heat level are used, which are
adjusted in the Printer Configuration.
The self test printout can be stopped by pressing the key.
More information about the several test prints you can find on the following
pages.