CAB M4, Руководство оператора

Страница: 14 / 132

14 cab Produkttechnik GmbH & Co KG
M4
Options
External Media Unwinder/Rewinder
For operating large print jobs, external unwinders and rewinders are available
to handle big label rolls. The External Rewinder ER1 can be used for label rolls
with a diameter up to 8.3 in (200mm). The External Rewinder ER4 and the
External Unwinder EU4 are provided for roll diameters up to 11.8 in (300mm).
Present Sensor
The Present Sensor PS8 is needed to complete the M4 P-version printers for
the peel-off mode. The Present Sensor indicates the presence of a label in the
dispense position, and pauses the printing process until the label is removed.
Cutter
With the cutter unit installed, labels or continuous media may be cut when
desired. Cutter options include a choice of: after each label, after a specific
quantity of labels, or at the end of a print job. For cutter operation, the printer
firmware will extend the label for cutting based on specified displacements,
then automatically backfeed the label, so that after making a cut, the label roll
will be repositioned and ready for printing the next label.
The cutter is powered directly by the printers peripheral connector.
Memory Card
The printer includes an option for using memory cards in order to permanently
store graphics, fonts or whole label formats. The data can be downloaded via
any of the printers data interfaces. CompactFlash Type 1 cards with a capacity
of 16 up to 512 MB are accepted.
1. Product Description