manualshive.com logo in svg

CAB HS 120, Руководство оператора, Страница: 15 / 18

Поделиться
Скачать
CAB HS 120 Скачать руководство пользователя страница 15

15

14

4.2.2  Operation Modes

 

Check the operation mode by means of the LEDs (2 / 3 / 4).

 

Touch button 

 for changing the operation mode.

Automatic Peel-Off

 

After switching in the "Automatic peel-off" mode the first label will 

 

immediately be fed to the peel position.

 

Take the label. 
The next label will be fed to the peel position.

!

Attention!

Risk of unintended start-up.

 

Do not touch the feeler of the present sensor excepting the 
error treatment.

Peel-Off on Demand

 

For peeling-off a label touch button 

 .

 

Take the label.

 

For peeling-off the next label touch button 

 again. 

Peel-Off on Demand with External Control

for devices with peripheral port only

If an external control is connected LED (2) is illuminated.

i

Notice! 
With an external control connected the device cannot be switched to 
the "Automatic peel-off" mode.  
The release button

 

 

has no function.

 

Send a start signal. 
A label will be fed to the peel position

 

Take the label.

 

Send a new start signal. 

4 Operation

Содержание HS 120



















Отзывы:

Нет отзывов