CAB eos 1, Руководство оператора

Страница: 9 / 36

8 9 9
13
15
12
10 11
16 17
14
10 Label sensor
11 Printhead retainer with
printhead
12 Guides
13 Knob for adjusting the guides
14 Knob for adjusting the label
sensor
15 Lever for locking the
printhead
16 Tear-off plate
17 Print roller
Fig. 3 Print Mechanics
2.2 Unpacking and Setting-up the Printer

Lift the label printer out of the box and set it up on a level surface.

Check label printer for damage which may have occurred during transport.

Check delivery for completeness.
Contents of Delivery:
• Label Printer
• Power Cable Type E+F
• Cardboard Core
• Operator's Manual
• DVD with label software, Windows driver and documentation
• USB Cable
• depending on the type of printer, tear-off plate (mounted), cutter or perfo-
ration cutter

depending on the type of printer, mount cutter or perforation cutter

5.1 on page 20.
i
Notice!
Please keep the original packaging in case the printer must be
returned.
i
Notice!
When transporting the printer remove the transfer ribbon and media.
!
Attention!
The device and printing materials will be damaged by moisture and
wetness.

Set up label printers only in dry locations protected from splash
water.
2 Installation