42
42
7.3
Error Pattern
No. Error pattern
Possible error cause
Troubleshooting
1
The label is not centered on the pair of pads after
delivery from the printer.
Correct the pad position in
the X direction
In the basic position, pads are not aligned parallel to
each other
Align the pad precisely
using the setting tool for
pad assembly
2
Product not exactly aligned to the applicator.
Correct the position of the
product or the product
holder in relation to the
applicator. Align the axis of
the product exactly in the
printing direction.
After delivery from the printer, the label is twisted onto
the pair of pads
Alignment of the applicator
with the dispensing edge
of the printer.
Parallelism
Check support air.
3
Product not exactly aligned in the X direction to the
applicator.
Correct the position of the
product or the product
holder in relation to the
applicator
4
Product not exactly aligned in the X direction to the
applicator.
Correct the position of the
product or the product
holder in relation to the
applicator
