6
6
2
Product Description
2.1
Important Features
•
The supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator
can be adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels they are cleaned by air pressure pulses at the end of each
application.
•
For operation within a system the I/O interface of the printer can be used.
2.2
Technical Data
Front
Rear
Diameter x Pi
(
π
)
L
L
D
(Ø) x
Pi
(
π
)
D
L
V
P
Flag length L
Flag length L
Label transfer
Label type
4712 L 300
Label width 4
mm
60 -100
Label height
mm
10 - 50
Diameter
Ø
mm
3 - 20
Working pressure
MPa
0,45 (4,5 bar)
Sound pressure levels
unter 74 dB(A)
Product during labeling
fixed
¢
Labeling of the product
from above
¢
from below
¢
from the side
¢
Product height
fixed
¢
Product to the lower edge
at the cylinder stroke 300
up to mm
260
Immersion depth of tongs
mm
55
Offset P
mm
max. 0,5 - 1
Lateral displacement
mm
max. 0,2
Cycle time approx. cylces/min. 15
~/min
15
Table 1
Technical Data
