C.P.Bourg BB3002 PUR, Руководство оператора

Страница: 81 / 142

Operator Manual
BB3002 Page 81
Initial issue: 05/08
Latest revision: 11/08
5.3.2 Cover suction:
According to the width of the cover, the operator must adjust the position of the cursor (1) to
ensure that the covers are picked up correctly.
Example:
Place the covers on the cover station tray.
In the above example, the cover leaves the letter "D" visible.
Unscrew the cursor (1) and adjust its position so that the letter "D" appears.
The principle is to adjust the position of the cursor (1) to the letter visible on the cover
station just next to the cover.
According to the cover material, additional plastic stud (2) may be installed to limit the
suction.
Cursor (1)
The cover leaves
the letter D visible
Plastic stud (2)