-
4-
PANEL DESCRIPTIONS
1.
USB(
USB 2.0 downstream port
):
Connect to USB flash driver or other USB devices
(device configure as RX)
2.
RS-232:
Connect to PC serial port with a DB-9 male-male cable
3.
Dip Switch:
Video channel selection
4.
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
5.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
6.
USB:
Connect to upstream USB host (device configure as TX)
7.
Link LED indicator:
[Blink] When unit connect a Cat-5/5e/6 cable
[Shine] When transmitting unit connect to a HDMI source and linked to the receiving unit
8.
System LED indicator:
[Blink] When unit is connected with a power supply unit
[Solid] Device is ready
9.
Info LED indicator:
When user clicks the LED button in the software, the LED light will blink 30 seconds.
10.
+5V DC:
Connect to 5V DC power supply
11.
HDMI IN:
Connects to a HDMI source with a HDMI cable
12.
HDMI OUT:
Connects to a HDMI display with a HDMI cable.
13.
Analog audio line in:
Connect to upstream audio output (device configured as TX)
14.
Analog audio line out:
Connect to downstream headphone output (device configured as RX)
15.
Micro-USB:
for F/W update
16.
RJ-45:
Gigabit Ethernet port
17.
Dip Switch:
configures as a transmitter or receiver
[
]
configures as a transmitter
