background image

MP3 Downloadable

Wire Free Chime Kit

4

1: Press the Bell Push to 

confirm the setup

 

2: The Chime will play the 

melody and the alert light will 

flash

4

2

1: Place a small flat screwdriver 

    into the locking clip on the   

    base of the Bell Push.

2: Gently twist. 

3: The backing plate will unclip. 

1

1: Push Button 

 

6: Portable Chime 

2: Melody Selector   

7: Speaker  

3: Bell Push Battery  

8: Volume Control    

4: Signal Sent LED   

9: LED Alert

5: USB Lead 

             10: USB Input

MP001

:3

1: 

4: 

10: 

8: 

9: 

5: 

6: 

2: 

3

1: Remove the battery cover. 

2: Insert 3 X 1.5V Size ‘AA’       

    batteries (Not Supplied).

3: Make sure the     

    Positive/Negative terminals

    match the internal markings  

 

4: switch the Chime ON 

5: Replace the battery cover.

1: Insert CR2032 battery 

    (Supplied) into the battery 

    holder.

2: Make sure the positive side  

    is facing upwards.

3: Replace back plate.

Warning: Make sure that the batteries are 

replaced correctly to avoid battery failure. 

Only replace with same or equivalent type.

3

Downloading MP3 Melody:

Functions:

To select the Chime Volume 

level, press the ‘+’ button  

increase the volume and ‘-’ 

button to decrease the volume. 

To select a melody for the Door Chime 

1: Select between preprogrammed (IN) or 

    downloaded MP3 melodies (MP3).

2: Press the       arrows on the door    

    chime to select the next melody

 

3: The chime will play the newly selected 

     melody

4: Press the centre button to confirm

    Or press     arrows to select the next 

    melody.

   

1: Connect the chime to the 

USB port of a computer using 

the USB lead (supplied ).

PC Only

2: The Chime will appear as a USB 

storage device, install and run MP3 

Editor.exe file on your computer.

MP3 Music

Look in:

Open

MP3 File(*.mp3)

File Name:

Files of Type:

Open

Cancel

Melody File 1

Melody File 2

Melody File 3

Melody File 4

3: Select the open file icon       , 

highlight the required MP3 file on 

your PC and click Open.

5: Edit the file length by inputting the required start and end times. 

Use the Play/Pause button to listen to the mp3 file, recommended file 

length is between 8-10sec.

5: Press the scissors icon to Cut and save the MP3 file, the 

recommended file length is approximately 8-10 seconds long. 

Melody File 1 Melody File 2

Melody File 3

Back

Search

Folders

E:\

Address

PC & Mac

6: Drag and drop the edited file onto the MP3 Chime, the file will be 

saved on to the MP3 chimes internal memory.

00:00.0 / 00:00.0

00

Start Time

End Time

00

00

00

0

0

:

:

.

.

Reset

Rewind

Fast 

Forward

Play

Volume

Stop

Press to Cut

4: Highlight the MP3 file in the tunes list and press PLAY.

Video Tutorial:

View or video tutorial saved on the MP3 chime or via our 

YouTube channel.

http://www.youtube.com/user/CHByron

Отзывы: