BYOC Soaring Skillet Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 43

BYOC Soaring Skillet Скачать руководство пользователя страница 1

Build Your Own Clone

Soaring Skillet

Kit Instructions

Warranty:

BYOC, Inc. guarantees that your kit will be complete and that all parts and components
will arrive as described, functioning and free of defect.  Soldering, clipping, cutting,
stripping, or using any of the components in any way voids this guarantee.  BYOC, Inc.
guarantees that the instructions for your kit will be free of any majors errors that would
cause you to permanently damage any components in your kit, but does not guarantee
that the instructions will be free of typos or minor errors.   BYOC, Inc. does not warranty
the completed pedal as a whole functioning unit, nor do we warranty any of the
individual parts once they have been used. If you have a component that is used, but feel
it was defective prior to you using it, we reserve the right to determine whether or not the
component was faulty upon arrival. Please direct all warranty issues to:
[email protected] This would include any missing parts issues.

Return:

BYOC, Inc. accepts returns and exchanges on all products for any reason, as long as they
are unused. We do not accept partial kit returns. Returns and exchanges are for the full

1
2
3
...
»

Содержание Soaring Skillet












































Отзывы:

Нет отзывов