background image

 

BYOC Octave Fuzz Kit Instructions

 

 

 

 

 

Warranty:

 

BYOC, LLC guarantees that your kit will be complete and that all parts and 
components will arrive as described, functioning and free of defect.  Soldering, 
clipping, cutting, stripping, or using any of the components in any way voids this 
guarantee.  BYOC, LLC guarantees that the instructions for your kit will be free of 
any major errors that would cause you to permanently damage any components in 
your kit, but does not guarantee that the instructions will be free of typos or minor 
errors.   BYOC, LLC does not warranty the completed pedal as a whole functioning 
unit nor do we warranty any of the individual parts once they have been used.  If 
you have a component that is used, but feel it was defective prior to you using it, we 
reserve the right to determine whether or not the component was faulty upon 
arrival.  Please direct all warranty issues to:

 

[email protected] this would include any missing parts issues. 

 

Return:

 

BYOC, LLC accepts returns and exchanges on all products for any reason, as long as they 
are unused. We do not accept partial kit returns.  Returns and exchanges are for the full 
purchase price less the cost of shipping and/or any promotional pricing.  Return shipping 
is the customer’s responsibility.  This responsibility not only includes the cost of shipping, 
but accountability of deliver as well.  Please contact [email protected] to 
receive a return authorization before mailing. 

 

Tech Support:

 

BYOC, LLC makes no promises or guarantees that you will successfully complete your 
kit in a satisfactory manner.  Nor does BYOC, LLC promise or guarantee that you will 
receive any technical support.  Purchasing a product from BYOC, LLC does not entitle 
you to any amount of technical support.  BYOC, LLC does not promise or guarantee that 
any technical support you may receive will be able to resolve any or all issues you may 
be experiencing. 

Содержание Octave Fuzz





















Отзывы: