Pangean Glider
Assembly Instructions
Important Note:
We are a Maine based company and deeply commited to supporting you with this assembly.
PLEASE give us a call if we can help in any way. As you assemble, be sure NOT to fully tighten the
fasteners until you have inserted the last of 14 screws. This provides flexibility and eases assembly.
Contact us for any help:
Byer of Maine
74 Mill St. Orono, ME 04473 USA
Phone: 207-866-2171
Email: [email protected]
www.byerofmaine.com
Step 2
Assemble lower narrow crossrail
and install 2 screws loosely tightened
One screw,
each end
Step 1
Set the two frame assemblies side
by side with rounded parts up. Assemble
TOP (Short) crossrail and install 4 screws
loosely tightened
install with wider
groove UP
Two Screws,
each end
