BYD ECB16S-B, Руководство оператора, Страница: 30 / 43

TRANSPORTATION AND STORAGE
ECB16S-B/ECB18S-B 58
ECB16S-B/ECB18S-B
59 OM-ECB16/18S-B2019001-EN
Braking Fluid Inspection
Add brake oil into the brake oil reservoir.
Braking System Bleeding
(1) Run the forklift until the driving axle gets lightly heated. Park the forklift on a level
floor, apply the hand brake, switch off the forklift, remove the key and press down the
emergency disconnect switch.
(2) Add brake oil into the brake oil reservoir.
。
(3) Clean the surrounding area around the braking oil drain plug, connect it to a container.
Loosen the braking fluid drain plug.
(4) Depress the service brake pedal.
(5) Repeat the action of adding the brake fluid and press the pedal until there aren't any
bubbles in the container. Tighten the drain fluid plug and add braking fluid to 2/3 of the
braking reservoir.
。
1.Single drive type
CODE PART NAME QTY INFORMATION
11 FLUID DRAIN PLUG 1 20Nm
11
< 1 < > 2 < > 3 >
2.Dual drive type
Braking Fluid Replacement
Run the forklift until the driving axle gets lightly heated. Park the forklift on a level floor, apply
the hand brake, switch off the forklift, remove the key and press down the emergency disconnect
switch.
(1) Clean the surrounding area around the braking oil drain plug, connect it to a container.
Loosen the braking fluid drain plug.
(2) Depress the brake pedal and drain all the braking fluid.
(3) A d d n e w b r a k i n g f l u i d , b l e e d t h e b r a k i n g s y s t e m a n d t h e n t i g h t e n t h e
d r a i n f l u i d p l u g a n d a d d b r a k i n g f l u i d t o 2 / 3 o f t h e b r a k i n g r e s e r v o i r.
1.Single drive type
< 1 < > 2 < > 3 >
11
CODE PART NAME QTY INFORMATION
11 FLUID DRAIN PLUG 1 20Nm
11
11
CODE PART NAME QTY INFORMATION
11 FLUID DRAIN PLUG 1 20Nm