Battery Box Premium HV Combiner Box
19
Installation Manual V1.
1
8. Decommissioning
8.1.
Disassembling the Combiner Box
Requirement:
The Combiner Box must be disconnected from voltage sources.
Procedure:
1. Open the doors of the Combiner Box.
2. Disconnect the input cables from the blocks.
3. Disconnect the output cables.
4. Disconnect the grounding cables.
5. Release the cable glands.
6. Pull all cables out of cable glands and isolate them.
7. Disassemble the Combiner Box.
8.2.
Disposing of the Combiner Box
Dispose of the Combiner Box in accordance with the applicable disposal regulations for electronic
waste.
Danger to life due to electric shock when touching live components of the Combiner Box
• Observe the following safety rules when disconnecting:
– Disconnect from voltage sources.
– Ensure that the device cannot be reconnected.
– Check that no voltage or current is present.
– Ground and short-circuit.
– Cover or isolate any adjacent live components.
Risk of burns from touching hot components
• Wear personal safety equipment when working on the device.
BYD Smart Device Hungary Kft.
