BYD ATTO 3 2022, Руководство пользователя

Страница: 75 / 201

74
Emergency Warning Light
Button
When the Emergency Warning Light Button
is pressed, all turning lights and turn signals
on the instrument panel start flashing. They
all stop flashing when the button is pressed
again.
CAUTION
•The emergency warning lights are
used to alert drivers and pedestrians
of possible risks.
Mode Switch Group
These switches enable drivers to select
different regenerative braking, snow, and
ECO, SPORT or NORMAL modes.
① Regenerative braking mode
• The default setting is the standard
regenerative braking mode.
• Push up this switch to increase
regenerative braking.
② Snow mode switch
• The vehicle will be exclusively on snow
mode when this button is pressed.
• This mode is recommended when the
vehicle is being driven through roads
covered in slippery materials such as
grass, snow, ice, or gravel.
• In snow mode, traction and control
features are optimized, and the
accelerator pedal is selected with
caution.
③ MODE switch
• The default setting is ECO mode.
• Move this switch up or down to select
ECO, SPORT or NORMAL modes.
• ECO: moderate power, comfortable
driving, optimized energy efficiency.
• NORMAL: proper balance between
power and energy efficiency.
• SPORT: improved power performance.
If battery SOC is too low and vehicle
temperature is too high or low,
acceleration performance may be lower.
REMINDER
•When the driver switches modes and
releases the accelerator pedal, the
vehicle's power output characteristics
change according to the driver's
needs. Make sure to drive safely.
•All modes have a power-off memory
function. The vehicle will be in the
same mode as it was when it was
powered off.