BYD ATTO 3 2022 Скачать руководство пользователя страница 51

Страница: 51 / 201

NFC Key Card*

• Hold the NFC key card close to the NFC

sign on the right side mirror. Then, all

doors can be unlocked or locked when

the vehicle is powered off.

CAUTION

•

The NFC card is an electronic product.

To prevent NFC card malfunction or

damage to the NFC card, the following

instructions should be followed:

When a wireless charger is on,

do not place the NFC card in the

charging area.

Do not attach any object (such as

a metal seal or metal phone case)

that may cut off electromagnetic

waves when using the NFC card.

Do not expose the NFC card to

high temperatures, such as on the

dashboard.

Do not bend the NFC card.

Do not put the NFC card together

with other hard objects.

•The NFC card is for near field

communication, and identification

requires a complete fit, so it is

necessary to pay attention to the

position of the NFC.

The identification distance of the

NFC card is within 1 - 2 cm.

CAUTION

For successful NFC card

identification, it may be necessary

to stick it on the side mirrors.

Identification may take 1 to 2

seconds.

•The NFC smart card is a key

configured for the vehicle based

on the near field communication

method. In order to ensure vehicle

safety, handle it with care. If it is

lost, go to a BYD authorized dealer

or service provider to get a newly

configured card and block the lost

one.

Locking/Unlocking Door

Locking/Unlocking with

Mechanical Key

Insert the key into the key hole, turn and

remove the key, and pull the door handle

to open the door.

• To unlock the driver's door, turn the key

clockwise.

• To lock the driver's door, turn the key

counterclockwise.

Содержание ATTO 3 2022










































































































































































































Результаты поиска

Содержание ATTO 3 2022

Отзывы:

Похожие инструкции для ATTO 3 2022

Бренды по названию

Популярные бренды

BYD ATTO 3 2022, Руководство пользователя

Результаты поиска

Содержание ATTO 3 2022

Отзывы:

Похожие инструкции для ATTO 3 2022

Бренды по названию

Популярные бренды