BYD ATTO 3 2022 Скачать руководство пользователя страница 148

Страница: 148 / 201

147

IN-CAR DEVICES

Cup Holder

• The front seat cup holder is located

inside the center console cubby.

CAUTION!

•Avoid sudden acceleration or braking

when the cup holders are being used

to prevent spillage.

•Do not place cups without lids in the

cup holders.

•To ensure safety, drivers should not

use cup holders while driving.

Other Devices

Sun Visors

(1) Sun visor

(1) Sun visor
Sun visors can be used for sunlight coming

from the vehicle’s front or side. For side

use, just pull out the right end and turn it

towards the side window.

(2) Vanity mirror

• There is a vanity mirror on the inner side

of the sun visor. Slide the cover for use.

REMINDER

•Correct use of the sun visor improves

driving safety.

Safety Handle

• Pull the safety handle down for use. The

handle returns to its original position

when released.

CAUTION!

•Do not hang any heavy objects from

the safety handles.

Содержание ATTO 3 2022










































































































































































































Результаты поиска

Содержание ATTO 3 2022

Отзывы:

Похожие инструкции для ATTO 3 2022

Бренды по названию

Популярные бренды

BYD ATTO 3 2022, Руководство пользователя

Результаты поиска

Содержание ATTO 3 2022

Отзывы:

Похожие инструкции для ATTO 3 2022

Бренды по названию

Популярные бренды