BYD ATTO 3 2022, Руководство пользователя

Страница: 102 / 201

101
USING AND DRIVING
05
Starting and
Driving
Starting the Vehicle
In normal cases, start the vehicle as below:
• Engage the parking brake firmly.
• Switch the gearshift lever to P or N.
• Carry a valid smart key.
• Press the power button (2) while
pressing the brake pedal (1).
• When the "OK" indicator lights up on the
cluster, the vehicle is powered on.
The vehicle cannot power on when:
• The smart key warning light is lit up and
there is a "No key detected" message
on the cluster, meaning the key is not in
range or cannot be detected.
• The key is somewhere unsuitable for
detection, such as on the floor, in the
cup holder, trunk, etc.
Starting the vehicle in emergencies:
• The parking brake must be engaged.
• Turn off all lights and accessories.
• The electronic smart key is in the vehicle.
• Press and hold the smart key start
button for over 15 seconds.
CAUTION
•Do not touch the power button while
driving.
Remote Start Function
Before starting the vehicle:
1. The power mode is OFF.
2. The gearshift lever is on "P".
3. The vehicle speed is below 5 km/h.
Electronic Smart Key "Remote
Start Function"
1. Press and hold the "Remote Start/Stop"
button on the electronic smart key for
2 seconds to start the vehicle. After it
is started, the turning lights flash three
times.
2. If there is no effective operation within 10
seconds after remote start, the vehicle
powers off automatically and the turning
lights flash twice.
3. Press and hold the "Remote Start/Stop"
on the electronic smart key for 2 seconds
to power off. The turning lights will flash
twice.