5.
WINTERIZING THE INSTALLATION
•
Backwash the filter,
•
Treat the pool water with winterizing products.
•
Run the pump with the mulitport valve set to "circulation" to homogenise the concentration of these
chemicals in the pool water.
•
Stop the pump,
•
Turn the mulitport valve to the "DRAIN" position,
•
Open the valve on the waste line,
•
Close the skimmer and vacuum point valves,
•
Turn the motor on,
•
Lower the water level by about 30 cm,
•
Next, drain the filter by unscrewing the drain plug at the base,
•
Close all the valves,
•
Unscrew the drain plugs on the motor,
•
Cut power to the electrical panel,
•
Store the motor somewhere dry.
•
Put the 6-way valve to "HIVER" (WINTER) (see below).
FILTRATION
E
GO
UT
F
ER
ME
E
C
ONT
RE-
LAV
AG
E
C
IR
CU
LA
TI
O
N
R
IN
CA
GE
H
IV
ER
22/36
CONSTRUCTION & RÉNOVATION
2021/01 - Indice de révision : I - Code : 26680
