2.
ASSEMBLING THE FILTER
1
Remove the diffuser and swing the collector to the side.
2
Check that the drain valve is closed.
Fill the pump with water until the water level is 5 cm above the
laterals.
3
Pour the sand (granulometry 0.6/1.25) in carefully to avoid
damaging the laterals.
Put the diffuser back in position.
4
Fit the o-rings into the grooves on the bulkhead fittings.
5
Assemble the air bleed valve on the lid.
17/36
2021/01 - Indice de révision : I - Code : 26680
CONSTRUCTION & RÉNOVATION