BWT 31021000, Инструкция по установке и эксплуатации

Страница: 55 / 64

2021/02 - Indice de révision : E - Code : 37791 BIEN-ÊTRE
55/64
Designation Description
Diverting valve Directs the flow to one zone or another
Air controller
Controls the flow rate of air bubbles
released into the massage jets.
Directional jets
(70 mm and 95 mm)
Stationary massage jets, the direction may
be adjusted. The flow rate of each jet is set
individually by rotating the outer ring.
Rotating jets
(70 mm, 95 mm)
Rotating massage jet. The flow rate of
each jet is set individually by rotating the
outer ring.
Dual rotating jet
(95mm)
Rotating massage jet. The flow rate of
each jet is set individually by rotating the
outer ring.
Mini jet Air jet supplied by the blower (option).
4.2 Chromatherapy option
The Chromatherapy option consists of LED lighting located just under the water line around the periphery
of the spa, inundating the water with a homogeneous, soothing, multi-directional light that contributes to
your well-being.
The control panel (LIGHT key) allows selection of the lighting mode from the available options, fixed
colour, cross fades between the various colour with transitions of carious lengths (see the instruction
manual provided with the control pad for more information).
5. MAINTENANCE
5.1 Filtration
Spa water is filtered through one or two filter cartridges (depending on the spa model) located in the
skimmer body. These cartridges need to be cleaned regularly and replaced if necessary.
We recommend that you use two filter cartridges (or two sets of filter cartridges) alternately so that each
cartridge (or set of cartridges) may be cleaned properly while the other is in use.
Periodic maintenance may be programmed using the spa pack’s electronic timer. The timer will then
remind the user to clean the cartridges at a pre-determined time (see maintenance timer configuration in
the spa pack instruction manual).
The cleaning interval will vary from one spa to another depending on several criteria (indoor, outdoor
installation, number of users, frequency of use, water temperature, etc.). At the outset, filter cartridges
should be checked every week if the spa is installed outdoors or every 2 weeks if the spa is installed