PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
XLT PLUS
Analog & Digital 900 MHz RF Receiver
MODEL 465AN/D-5000-DC
DESCRIPTION
The A
IR
-E
AGLE
XLT
PLUS,
MODEL
465AN/D-5000-DC
I
s an RF receiver
capable of receiving one analog or voltage input signal and one dry-
contact input signal from an analog / digital output transmitter. The
transmitter and receiver combine to create a long range radio
frequency system that monitors and operates hazardous or hard-to-
reach electrical apparatus from safe, convenient locations of up to a
mile away. (Or longer with optional antennas) This unit is user-
programmable for up to seven network frequencies to allow multiple
systems to operate simultaneously in the same area without
interference.
INSTALLATION
1.
Mount the A
IR
-E
AGLE
XLT PLUS R
ECEIVER
in a convenient location
2.
Install wiring to terminal strip.
3.
Connect DC power and control to the proper terminals in your control
circuit.
TERMINAL STRIP WIRING
TER1 (LEFT BLOCK)
TER2 (RIGHT BLOCK)
1
(-) 9-36VDC Input
1
Analog Output (-)
2
(+) 9-36VDC Input
2
Analog Output (+)
3
(+) Voltage Output
4
N/O Relay
5
C Relay
6
N/C Relay
7
N/O Relay
– 2
nd
Pole
8
C Relay
– 2
nd
Pole
9
N/C Relay
– 2
nd
Pole
10
Open Drain Output (not used)
Note #1
–
Output type MUST be selected
for the terminal strip wiring to
take effect! (See OUTPUT OPTIONS & FREQUENCY SET-UP)
(SIMILAR MODEL PICTURED)
Dimensions (with mounting plate) 6.3” L x 4.8” W x 2.3” H
CONTROLS & INDICATORS
POWER LED
Illuminates GREEN when powered on
OUTPUT
FAULT LED
Used in 4-20mA mode only
– Illuminates RED when
current loop open
