PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
SR PLUS
2.4 GHz RF Transmitter
MODEL 36-10100-120I-AC
DESCRIPTION
The A
IR
-E
AGLE
SR
PLUS
TX is an R.F. transmitter capable of sending
a single 120VAC input command to an Air-Eagle SR Receiver from up
to 600 feet away. Any number of transmitters and receivers can be
combined to create a medium-range remote control system that
operates hazardous or hard-to-reach electrical apparatus from safe,
convenient locations. This unit has eight user-selectable network
frequencies to allow multiple systems to operate simultaneously in the
same area without interference.
APPROVALS
United States (FCC)
OUR-XBEEPRO
Canada (IC)
4214A-XBEEPRO
Europe (CE)
ETSI
INSTALLATION
DISCONNECT Power from all equipment before installation.
1.
Mount the transmitter in a convenient location.
2.
Install input wiring to terminal strip.
3.
Install antenna onto antenna connector located on the right side on
the enclosure.
4.
Connect supplied power input cable to your external power source.
TERMINAL STRIP WIRING
TER 3
VOLTAGE INPUT
TER 2
RELAY OUTPUT
TER 1
AC/DC POWER INPUT
1
120VAC
– (N)
1 Not Used
1 100-250 VAC
2
120VAC - (H)
2 Not Used
2 100-250 VAC
3 Not Used
3 Ground
GENERAL OPERATION
When 120VAC appears on the input the unit transmits to energize relay 1
(or another relay as selected by the channel code transmitted) in any
receiver within transmit range. The signal transmits continuously as long
120VAC is present and ceases when 120VAC is removed
Dimensions (with mounting plate) 7.07L x 3.57W x 1.62H
CONTROLS AND INDICATORS
Power
– LED1
Illuminates green when unit is powered
TX
– LED2
Illuminates red when unit is transmitting
Relay
– LED3
Not used on this model
RF1
RF module that sends data to the remote
receiver
SEL1
Seven dip switches for selecting options &
network frequency
TER3
Voltage input
TER2
Relay output
TER1
Power Input
