BWI Eagle AIR-EAGLE SR 38-5000-AC, Информационный бюллетень о продукции

Страница: 1 / 3

PRODUCT INFORMATION
BULLETIN
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE ® SR
2.4 GHz RF Receiver
MODEL 38-5000-AC
DESCRIPTION
The A
IR
-E
AGLE
SR is an RF system designed for short to medium range
wireless remote control of electrical apparatus in a variety of industrial
applications. Systems can consist of any number of receivers and
handheld or contact input transmitters working together. This receiver is
equipped with 4 independent relays that can switch 5 amps @ 120VAC or
30VDC. The relays are user programmable for momentary or
toggle/latching operation and can be directly interfaced with the
customer's equipment or P.L.C. Sixteen user-selectable digital addresses
and eight user selectable frequencies allow multiple systems to be used in
the same area. Capable of receiving remote signals transmitted from up to
600 feet away, the Air-Eagle SR Receiver utilizes spread-spectrum
technology and provides the utmost in security and reliability.
INSTALLATION
1.
Mount the A
IR
-E
AGLE
SR RECEIVER
IN
a convenient location.
2. Install relay control wiring to the terminal strip.
3. Attach rubber duck antenna or coax from external antenna to
connector on side of enclosure.
4. Connect supplied power input cable to your external power source.
Make the following connections on the PC Board Terminal Strip (TER1)
TERMINAL STRIP WIRING (TER1)
Terminal 1 100-250 VAC Power Input
Terminal 2
100-250 VAC Power Input
Terminal 3 CH1 Dry Contact Input (Common)
Not used on
this model
Terminal 4 CH1 Dry Contact Input
Terminal 5 CH2 Dry Contact Input (Common)
Terminal 6 CH2 Dry Contact Input
Terminal 7 N/O Relay 1
Terminal 8 C Relay 1
Terminal 9 N/C Relay 1
Terminal 10 N/O Relay 2
Terminal 11 C Relay 2
Terminal 12 N/C Relay 2
Terminal 13 N/O Relay 3
Terminal 14 C Relay 3
Terminal 15 N/C Relay 3
Terminal 16 N/O Relay 4
Terminal 17 C Relay 4
Terminal 18 N/C Relay 4
CONTROLS & INDICATORS
POWER/TX
LED1
Dual color LED. Illuminates red while receiver is
booting up; changes to green when boot-up is
successful and unit is ready to operate. If this LED
fails to turn green, power unit off for 15-20
seconds, then reapply power.
LED2 Illuminates green while relay 1 is energized
LED3 Illuminates green while relay 2 is energized
LED4 Illuminates green while relay 3 is energized
LED5 Illuminates green while relay 4 is energized
REL1
– REL4
Four SPDT output control relays
RF1 or 2 RF module that transmits/receives data
SEL1 Dip switches for changing address & frequency