PRODUCT INFORMATION
BULLETIN
238 Pillow Street
Butler, PA 16001
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
FM2
900 MHz RF Transmitter
DUAL CONTACT INPUT
MODEL 43-1000-BAT
DESCRIPTION
The model 43-1000-BAT, A
IR
-E
AGLE
FM2 TX
IS
a dual contact input
R.F. transmitter designed to transmit unique signals to any A
IR
-E
AGLE
FM2 R
ECEIVER
which can be located up to 1200 feet away. This model
comes equipped with a terminal strip for ease of interfacing with any
external
dry contact input
devices such as tilt switches, flow switches,
speed switches etc. The internal batteries allow the transmitter to be
operated in areas without a power source.
PC BOARD SET-UP INFORMATION
Make the following connections on the PC Board Terminal Strip:
DC INPUT TERMINAL STRIP (DC IN)
Terminal 1
Positive (+) 6VDC from internal batteries
Terminal 2
Negative (-) 6VDC from internal batteries
INPUT 1 TERMINAL STRIP (INP1)
Terminal 1
CH1 Dry Contact Input (+)
Terminal 2
CH1 Dry Contact Input (Common)
Terminal 3
CH2 Dry Contact Input (Common)
Terminal 4
CH2 Dry Contact Input (+)
I/O TERMINAL STRIP (TERM2)
Terminal 1
Not Used On This Model
Terminal 2
Not Used On This Model
Terminal 3
Not Used On This Model
Terminal 4
Not Used On This Model
NETWORK SWITCH TERMINAL STRIP (NSW1)
Terminal 1
Not Used On This Model
Terminal 2
Not Used On This Model
NETWORK SWITCH CONFIGURATION OPTIONS
(SEL1)
Network
Address
SW1
SW2
#1
OPEN
OPEN
#2
CLOSED
OPEN
#3
OPEN
CLOSED
SEL 1 (SW1 & 2):
USED TO SET
NETWORK
FREQUENCY
#4
CLOSED
CLOSED
Dc Power Input Module
Open
Closed
SEL1
2
amp
+
-
DC IN
INP1
TERM2
1
2
3
4
1
2
3
4
NSW1
1
2
