Safety
instructions
10
Translation of the original assembly and operating manual
V-Mix Fix
Plus
2.2
Organizational measures
The operating manual:
must always be stored at the location of the machine,
must be freely accessible to operator and maintenance personnel at all times.
2.2.1
Responsibilities of the owner
The owner is required to:
observe all national, generally applicable regulations regarding safety and accident prevention as
well as environmental protection,
limit work with/on the machine to personnel who:
o
are familiar with all general safety and accident-prevention regulations,
o
have been instructed in how to work with/on the machine,
o
have read and understood this operating manual.
keep all warnings attached to the machine legible at all times,
replace damaged warnings,
provide the necessary personnel protective equipment such as:
o
safety goggles,
o
work gloves,
o
safety shoes,
o
protective suit,
o
skin protection, etc.
2.2.2
Responsibilities of the operator
Before commencing work, all personnel designated to work with/on the machine are required to:
observe all national, generally applicable regulations regarding safety and accident prevention as
well as environmental protection,
read and observe chapter "Qualification of the personnel", starting on page 11 of this assembly and
operating manual,
read the chapter "Warnings and instructions", starting on page 20 of this assembly and operating
manual and observe it while operating the machine,
become familiar with the machine,
read the chapters in this operating manual that are essential for the execution of the work tasks they
have been assigned.
If detecting that a fixture is no longer fully compliant with the safety regulations, the operator is required
to remedy this defect immediately. If the correction of a fault is not part of the operator's responsibilities
or the operator lacks the necessary expertise, the operator must report the defect to his supervisor or the
owner.