General description
Chapter 1
Layout of the operating manual
Page 7
Version: 3/25/20
Translation of the original operating manual 11658817194
Bernard van Lengerich
Layout of the operating manual
1.3
Safety-relevant instructions are identified by corresponding symbols and bold lettering.
Lists
Lists of properties with an arbitrary order, which does not necessarily have to be observed, are
identified with a bullet point.
Example:
Property A
Property B
Sub-property of property B
Sequences
Work steps that need to be executed in the specified order are numbered, and the result of the
work step is written in italics.
Example:
1.
Step 1 to be executed
Result of step 1
2.
Step 2 to be executed
2.1
Sub-step of step 2 to be executed
Responsibilities of the owner
1.4
The owner is required to:
observe all national, generally applicable regulations regarding safety and accident
prevention as well as environmental protection,
limit work with/on the machine to personnel who:
are familiar with all general safety and accident-prevention regulations,
have been instructed in how to work with/on the machine,
have read and understood this operating manual.
keep all warnings attached to the machine legible at all times,
replace damaged warnings,
provide the necessary personnel protective equipment such as:
safety goggles,
work gloves,
safety shoes,
protective suit,
skin protection, etc.
