manualshive.com logo in svg

BVL V-COMFORT 2300, Руководство по эксплуатации

Поделиться
Скачать
BVL V-COMFORT 2300 Скачать руководство пользователя страница 63

 

Operation 

Chapter 7 

Operating the machine 

Page 63 

 

Version: 3/25/20 

 

 

Translation of the original operating manual 116588 

Bernard van Lengerich 

 

 

 

7.5.3

Transport trips 

A transport trip is a journey to and from the location where the machine is used while loaded or 
unloaded. 

 

 

DANGER 

Risk of injury when hitching a ride on the machine! 

  Hitching a ride on the machine is prohibited. 

 

 

WARNING 

Risks of personal injury from crushing, entanglement, catching or impact may arise if 
the front, farmyard and wheel loader and the machine tip over as a result of insufficient 
stability! 

  Adapt your driving style in such a way that you remain in full control of the front, farmyard 

or wheel loader and the mounted / hitched machine at all times: 

 

The factors to be considered in this regard are the driver’s personal driving abilities and 
the conditions of the road, curves, and traffic as well as visual and weather conditions, 
the driving characteristics of the front, farmyard or wheel loader and the impact by the 
mounted / hitched machine. 

  Never negotiate narrow curves at excess driving speeds. 

  Avoid abrupt steering maneuvers when driving on slopes along the slope and the layer 

line (tip-over hazard!). 

 

 

WARNING 

Risks of personal injury may arise if hydraulic functions are performed inadvertently 
during transport trips! 

  Secure the machine from being lowered inadvertently before setting out on transport trips. 

  Prior to transport trips: 

  switch off the control panel, 

  the oil circuit between the front, farmyard or wheel loader and the machine is switched 

off. 

 

 

WARNING 

Risks of personal injury from crushing, cutting, entanglement, catching and impact 
may arise if the mounted machine detaches from the front, farmyard or wheel loader by 
accident! 

  Prior to transport trips, perform visual inspections to determine: 

  if the quick-change device of the four-point mounting frame has been locked in place 

properly as specified in the operating manual of your front, farmyard or wheel loader. 

 

 

WARNING 

Risks may arise with improper use of the front, farmyard or wheel loader if the 
malfunction of components, insufficient stability and insufficient ability of the front, 
farmyard or wheel loader to steer and brake occur as a result! 

  The maximum payload of the mounted / hitched machine and the permissible axle and 

drawbar loads of the front, farmyard or wheel loader must be observed. If necessary, drive 
with the receiving hopper only partially filled. 

 

Содержание V-COMFORT 2300





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды