BVItech BV-46, Инструкция по эксплуатации

Страница: 16 / 20

ENG 16
BV-46
2. Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or attach
to other antennas.
Caution: The normal function of the product may be disturbed under the environment with electrostatic
discharge. If so, simply reset the product to resume normal operation by pressing a thin object RESET
button at the back of your unit. . All the settings will be reset to default settings and you need to set your unit
again. In case the function could not resume, please use the product in other location.
2. Battery Back-Up installation
In the event that the AC/DC adaptor power is disconnected or a power failure or other interruptions occur,
the back-up batteries will maintain the time and alarm settings. The light functions do not work when batteries
are only used to power your unit.
1. Remove the battery cover at the back;
2. Insert 3 x AAA batteries (alkaline batteries preferred) by observing the + and - polarity signs inside the
battery compartment;
3. Replace the battery cover, making sure the cover locks into place.
Note: Please note the white LED light, the colored mood light, always-on LCD backlight do not work while the
clock is operating on battery power only.
3. To set time, 12/24 time, Snooze duration and Wake-Up Light
1. Press SET/MEM to enter time set mode, the time digits “ 0:00 ” flash. Press
▲
or
▼
to set your desired
time. Press and hold
▲
or
▼
will accelerate setting in faster speed;
2. Press SET/MEM again, the clock display shows 24Hr and flashes. Then press
▲
or
▼
to select
12Hr or 24Hr. When 12Hr time format is selected, the icon will appear on the clock display to
indicate the afternoon time;
3. Then press SET/MEM again, the clock display shows Zz and “ 09 ” flashes. Press
▲
or
▼
to set your
desired snooze duration from 5 to 60 minutes;
4. Then press SET/MEM again, the clock display shows and “ OFF ” flashes. Then press
▲
or
▼
to set:
15 : turns light on and brighter gently 15 minutes before your set alarm time
30 : turns light on and brighter gently 30 minutes before your set alarm time
OFF : turn off the Wake-Up-Light feature
3. Press SET/MEM again (or if no key is pressed within 8 seconds) to return to normal time display.
4. To set the daily ALARM 1 & ALARM 2, SNOOZE Alarm
1. Press ALM 1.2 button once, the LCD display shows «
1
» and “ 0:00 ” and flashes;
2. Press
▲
or
▼
to set your desired alarm 1 time. Press and hold
▲
or
▼
will accelerate setting in
faster speed;
3. Press SET/MEM one at a time to select which alarm type you would like to wake up with:
- Wake-by-Buzzer ( icon appears);
- Wake-by-Radio ( icon appears);
- Wake-by-nature sounds (
icon appears with
, , or below the time digits);
: birds
: forest
: beach / water front
: rain and storm
4. When both , or icon disappear, the alarm is turned off. Press ALM 1.2 , then press SET/MEM
5 times, both , or icon disappear, the alarm is completely turned off;
5. Press ALM 1.2 again, the LCD display shows «
2
» and “ 0:00 ” and flashes. You could do alarm 2
settings by repeating Step 2 to Step 4 above;