8
Heating active icon
– if the setting temperature of the thermostat is higher than the current tem-
perature of the room or the heating surface, the heating active icon can be seen. In this case the
thermostat’s relay makes the circuit and the voltage will get to the output point 4.
Time
– displays the current time in hh:mm format. Setting of the time is detailed in point 7.
button – when momentarily touched, the required temperature value can be raised in the
turned on condition of the thermostat, or the current value of the factory settings menu point can
be changed (see details in the programming menu point)
button
– when momentarily touched, the required temperature value can be reduced in the
turned on condition of the thermostat, or the current value of the factory settings menu point can
be changed (see details in the programming menu point)
button
– when momentarily touched several times, the comfort, energy-saving and program
modes of operation can be changed in the turned on condition of the thermostat, or, when depres
-
sed for a longer time, it will enter the programming settings menu.
button – by momentarily touching it, the thermostat can be turned on and off.
6. FIX MODES OF OPERATION
When the or icon appears on the thermostat’s starting screen in its turned on condition,
set the temperature to be achieved by using the or button. Depending on the real tempe
-
rature of the room (or, depending on the settings, the heating surface) the thermostat switches
on and the icon is displayed. Using these modes of operation, the temperature set on the
thermostat (and to be achieved) will not change until the or button is touched. The steady
temperature values make quick setting possible to provide constant temperatures with time-inde-
pendent, unchanged values. For the or modes of operation any temperature values can
be set by touching the or button.
7. PROGRAMMING
The basic purpose of the programming function is to ensure that the thermostat can activate he
-
ating at a time and temperature corresponding to user demands. The use of the programming
function is recommended in general cases for permanently occupied properties such as family
homes and apartments with independent heating systems. To access the program mode of ope
-
ration turn on the thermostat, then set it to the program mode by momentarily touching (if
necessary, several times) the button.
For the settings touch the
button for a longer time (3 seconds). In the right bottom corner
of the display the time :pp (:mm) starts flashing. Touching the or button set the minute
value of the current time.
A tip: by pressing the
or
button continuously the required value can be reached more quickly;
one brief touching will change the value with one single minute.
For approval and proceeding touch the
button again briefly.
Now in the right bottom corner of the display the óó: (hh:) part of the time starts flashing.
Touching the or button set the hour value of the current time.
A tip: by pressing the
or
button continuously the required value can be reached more quickly;
one brief touching will change the value with one hour.
For approval and proceeding touch the
button again briefly.
Now the number of the days of the week start flashing in the left upper corner of the display.
Touching the or
button set the value of the appropriate day of the week (1 – Monday,