SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety, read and understand the information contained within. The owner and operator shall have an
understanding of this product and safe operating procedures before attempting to use this product. Instructions and safety information
shall be conveyed in operator’s native language before use of this product is authorized. Make certain that the operator thoroughly
understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use
of this product as outlined in this factory authorized manual, remove from service immediately.
Inspect before each use.
It is recommended that, prior to each use, an inspection be done by qualified personnel and that any missing
or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized replacement parts only. Any pump that
appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed from service immediately until such time
as repairs can be made. Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment
may require special training and knowledge.
PRODUCT DESCRIPTION
BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for performance and safety. These pumps, P8701 and
P8701M have a unique two-stage hydraulic circuit which allows quick displacement of hydraulic fluid under no load conditions and easy
pumping in loaded conditions. These lever operated pumps supply compressed hydraulic fluid to compatible applications i.e. rams,
presses, spreaders, compactors and crimping machines, anywhere that 10,000 PSI of fluid pressure is needed. Special skill, knowledge
and training may be required for a specific task and the product may not be suitable for all the jobs described above. Unsuitable
applications would include applications that call for a device to move, level or support persons, animals, hazardous materials, mobile
homes/dwellings in general, mirrors and/or plate glass, and/or to connect/secure hatches, components, etc. between bulkheads. The
user must ultimately make the decision regarding suitability of the product for any given task and assume the responsibility of safety for
himself/herself and others in the work area.
WARNING:
Always check connections before using. Alteration of these products is strictly prohibited. Use only those adapters
and attachments provided and approved by the manufacturer
.
WARNING
:
To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of each pressurized
attachment be equal to or greater than the rated working pressure developed by the hydraulic pump
2
!
!
Figure 2 - Model P8701M Components
Figure 1 - Model P8701 Components
Handle
Control
Valve Lever
Reservoir
Vent Screw
Oil Outlet Port
(3/8” -18NPTF)
Carrying
Handle
Drain Plug
Support
Frame
4-way
Control valve
Handle
Release
Valve Knob
Reservoir
Vent Screw
Oil Outlet Port
(3/8” -18NPTF)
Carrying
Handle
Drain Plug
Support
Frame
