MINI-HELLCAT
Made in the USA by
Buzzard Models
Please read and understand all steps to these instructions before beginning assembly.
This plane is not a toy and is potentially dangerous to operate. Children should not
operate this aircraft without adult supervision.
Before you start, it may be a good idea to gather the required items to complete this
plane. You will need a sharp knife, some foam-safe glue, a sanding block, and some
hinge tape. At the end of the instructions you will find a list of the recommended
electronic hardware.
Before we start the assembly of the structure, here are some general pointers.
-Smooth edges of all parts with some 320 grit sandpaper before you start.
-There are many glues that are compatible with depron foam, do a little research and
pick your own favorite.
-Painting depron is easy. Go to your local walmart and buy a couple of the $1.25 bottles
of acrylic craft paint. I use a ten dollar airbrush, but foam brushes work too. Included with
the foam parts are two stencils for the star and bar insignias shown.
You can find a link to the online version of the instructions on the ebay page for the kit.
