background image

1

Average Material Weights

Materials to use  

Weight (pounds per cubic yard)

Fine Salt-Dry  

2,250

Coarse Salt-Dry  

1,431

Sand/Salt up to 50/50 Mix-Dry 

2,700

Note:

 To calculate the total spreader weight (including ice 

control material), add the empty spreader weight plus the ice 
control material and spreader accessories.

Installation Instructions

—continued inside

SHPE1500, SHPE1500RED, SHPE1500YEL 
Series SaltDogg

®

 Electric Drive Poly Hopper 

Spreader 1.5 cubic yards

Serial Number 9700 and higher.
Protected by U.S. patent D520 524; 9,562,333

Table of Contents

General Information  .................................................................... 1
Warranty Information  .................................................................. 1
Safety Precautions  ..................................................................... 2
Installation Instructions  ............................................................2-3
Spreader Operation  .................................................................... 4
Spreader Maintenance  ............................................................... 5
Repair Parts & Drawings  .........................................................6-8

General Information

Spreader model numbers:

• SHPE1500 - spreader with standard chute
• SHPE1500X - spreader with extended chute

Overall Length:

 92-1/8"

Overall Width: 

50-1/2"

Overall Height

 (installed): 37-1/2"

Empty Weight:

 410 lbs.

Capacity Struck:

 1.5 cu. yd. 

Average Installation Time:

 3 hrs.

Vehicle Requirements

• 3/4 or 1 ton Pickup Truck above 8,500 lbs. GVWR.
• 135 amp or higher alternator is recommended.

Materials Recommended to Spread

CAUTION

Do not overload vehicle beyond the vehicle’s GVWR or 
GAWR. Check vehicle's load rating certification sticker for 
maximum vehicle capacity.

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (800) 841-8003

www.saltdogg.com

SHPE1500 SALTDOGG SPREADER WARRANTY 

INFORMATION

This warranty replaces all previous warranties and no 

employee of this company is authorized to extend addi-

tional warranties, or agreements, or implications not 

explicitly covered herein. 

Buyers Products Company warrants all parts of the 

product to be free from defects in material and workman-

ship for a period of two (2) years. Parts must be properly 

installed and used under normal conditions. Normal wear 

is excluded.

Any part, which has been altered, including modifica-

tions, misuse, accident, or lack of maintenance will not 

be considered under this warranty.

 

The sole responsibility of Buyers Products Company 

under this warranty is limited to repairing or replacing any 

part(s), which are returned, prepaid, 30 

days after such defect is discovered, and returned part(s) 

are found to be defective by Buyers Products Company. 

Authorization from Buyers Products Company must be 

obtained before returning any part. The following infor-

mation must accompany defective parts returned 

to Buyers Products Company: RMA #, spreader model, 

serial number, date installed, and distributor from whom 

purchased.

 

Buyers Products Company shall not be liable for damage 

arising out of failure of any unit to operate properly, or 

failure, or delay in work, or for any consequential dam-

ages. No charges for transportation or labor performed 

on any part will be allowed under this warranty.

Содержание Salt Dogg SHPE1500









Отзывы: