Butterfly Amicus 3000 Plus, Руководство пользователя

Страница: 9 / 30

Assembly Procedure cont
14. Then lay the control unit in the frame and insert the cable plugs into the connections on the
operating section (Figs 7 & 8). (The center connection remains free for possible special
accessories {not yet available}).
Fig 7 Fig 8
15. Fasten the net holders at the corners of the TT Table (Fig 9) and slip the extension tubes
onto the tube sections (Fig 10). Place the six plugs sewn onto the net into the end of the
extension tubes (Fig 11) or into the tube section at the corner sections. Ensure that the net
cutout for the robot head is about 8 inches above the TT table and that the Butterfly logo
(printed on the net) can be read by a player using the robot. Then guide the ends of the
collecting net over the TT net holder and fasten the rubber rings on the fastening screws of
the table tennis net (Fig 12).
Fig 9 Fig 10
Fig 11 Fig 12