background image

12 

Nor shall this warranty apply to any part that has been 
subjected to misuse, negligence, or accident. 

 
5.  Butler Audio does not authorize any other person to assume 

any other liability in connection with its products.   THIS 
WARRANTY IS THE ONLY EXPRESS WARRANTY MADE 
BY BUTLER AUDIO APPLICABLE TO ITS TUBE DRIVER 
BLUE PRODUCTS.  ANY IMPLIED WARRANTY OR 
MERCHANTABILITY FOR FITNESS FOR A PARTICULAR 
PURPOSE APPLICABLE TO BUTLER AUDIO TUBE DRIVER 
BLUE PRODUCTS IS LIMITED IN DURATION TO THE 
DURATION OF THIS LIMITED WARRANTY.  BUTLER 
AUDIO INC SHALL NOT BE LIABLE FOR THE INCIDENTAL 
CONSEQUENTIAL, OR COMMERCIAL DAMAGES 
RESULTING FROM THE BREACH OF THIS WRITTEN 
WARRANTY.    Some states or provinces to not allow the 
exclusion or limitation of incidental or consequential damages 
or limitations on how long an implied warranty lasts; so the 
above limitations or exclusions may not apply to you. 

 
6.  Your product will be serviced on an in-warranty basis within 

the warranty period for the correction of warranted defects.  If 
improper operation of your Tube Driver BLUE product should 
occur, contact Butler Audio Inc. via the email link provided at 

www.tubedriver.com

 for assistance with the return and 

factory repair of your Tube Driver BLUE product.  Return unit 
only 

after 

obtaining a RMA# (Returned Merchandise 

Authorization). 

 

******************** 

 
 
 
 
 
 
 
 
 
 

 

Содержание TUBE DRIVER BLUE 475


















Отзывы: