manualshive.com logo in svg

Butler NAV51.15, Инструкция по эксплуатации

Поделиться
Скачать
Butler NAV51.15 Скачать руководство пользователя страница 19

INSTRUCTION, USE AND

MAINTENANCE MANUAL

GB

Page 19 of 96

12.0  USING THE MACHINE

12.1  Precaution measures during tyre re-

moval and fitting

   

Before fitting a tyre, observe the following safety rules:
• always use clean, dry and in good condition rims 

and tyres; in particular, if necessary, clean the rims 
after all the balancing weights (as well as the adhesive 
weights on the inner side) have been removed, and 
make sure that:
- neither the bead nor the tread of the tyre are dam-

aged.

- the rim does not produce dents and/or deformation 

(especially for alloy rims, dents can cause internal 
micro-fractures,  that  pass  unobserved  at  visual 
inspection, and can compromise the solidity of the 
rim and constitute danger even during inflation);

• adequately lubricate the contact surface of rim and 

tyre bead. Use specific tyre lubricants only.

• replace the inner tube valve with a new valve. If the 

tyre tube has a metal valve, replace the grommet.

• make sure that the tyre is the right size for the rim. 

Never fit a tyre unless you are sure it is the right size 
(the rated size of the rim and tyre is usually printed 
directly on each of them).

• do not use compressed air or water jets to clean the 

wheels on the machine.

12.2  Preliminary operations

In view of the tyre changer structure and of its intended 
use, the operator must work with wheels with large 
diameter (up to 2550 mm) and with remarkable weight 
(up to 2300 kg).
The utmost care while moving the wheels is recom-
mended: make use of other operators, properly trained 
and with suitable clothes.

DURING ALL TYRES MOUNTING AND DE-

MOUNTING OPERATIONS, THE SELF-CENTRING 

CHUCK ROTATION SPEED CAN BE DOUBLED 

BY ROTATING THE SELECTOR (FIG. 8, 9A E 

9B REF. C).

LOW SPEED IS RECOMMENDED FOR WHEELS 

WITH GREAT DIAMETER AND WEIGHT.

THE CAREFUL LUBRICATION OF THE TYRES 

BEADS IS ALSO RECOMMENDED, IN ORDER 

TO PROTECT THEM FROM POSSIBLE DAM-

AGES AND TO FACILITATE MOUNTING AND 

DEMOUNTING OPERATIONS.

12.3  Preparing the wheel

• Remove the wheel balancing weights from both sides 

of the wheel.

REMOVE THE VALVE STEM AND 

ALLOW THE TYRE TO COMPLETE-

LY DEFLATE.

•  Establish  from  which  side  the  tyre  should  be  de-

mounted, checking the position of the groove.

• Find the rim locking type.

12.4  Wheel clamping

FOR WHAT CONCERNS THE DI-

MENSIONS AND WEIGHT OF THE 

WHEEL TO BE LOCKED, MAKE 

USE OF A SECOND OPERATOR 

WHO MUST HOLD THE WHEEL 

INTO VERTICAL POSITION, IN 

ORDER TO ENSURE SAFE OPERA-

TIVE CONDITIONS.

When handling wheels weighing more than 500 Kg a 
fork-lift truck or a crane should be used.

MAKE SURE THAT RIM CLAMPING 

IS DONE PROPERLY AND THAT 

THE GRIP IS SAFE, TO PREVENT 

THE WHEEL FROM FALLING DUR-

ING MOUNTING OR REMOVAL 

OPERATIONS.

DO NOT CHANGE THE SET OP-

ERATING PRESSURE VALUE BY 

MEANS OF THE MAXIMUM PRES-

SURE VALVES. THE MANUFAC-

TURER SHALL NOT BE RESPON-

SIBLE FOR INJURY OR DAMAGE 

ARISING FROM UNAUTHORISED 

CHANGES.

7522-M004-1_B

NAV51.15 - NAV51T.15 - NAV51.15N

Содержание NAV51.15




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды