Butler LIBRAK380.3DTEC Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 99

Butler LIBRAK380.3DTEC Скачать руководство пользователя страница 8

GB

Page 8 of 62

INSTRUCTION, USE AND

MAINTENANCE MANUAL

SOME OF THE PICTURES AND/

OR DISPLAY SCREEN PAGES

PRESENT IN THIS MANUAL HAVE

BEEN OBTAINED FROM PICTURES

OF PROTOTYPES, THEREFORE

THE STANDARD PRODUCTION MA-

CHINES AND ACCESSORIES CAN

BE DIFFERENT IN SOME COMPO-

NENTS/DISPLAY SCREEN PAGES.

1.0 GENERAL INTRODUCTION

This manual is an integral part of the product and

must be retained for the whole operating life of the

machine.

Carefully study the warnings and instructions con-
tained in this manual. It contains important instruc-
tions regarding

FUNCTIONING, SAFE USE and

MAINTENANCE.

KEEP THE MANUAL IN A KNOWN,

EASILY ACCESSIBLE PLACE FOR

ALL ACCESSORY OPERATORS

TO CONSULT IT WHENEVER IN

DOUBT.

THE MANUFACTURER DISCLAIMS

ALL RESPONSIBILITY FOR ANY

DAMAGE OCCURRED WHEN THE

INDICATIONS GIVEN IN THIS

MANUAL ARE NOT RESPECTED:

AS A MATTER OF FACT, THE NON-

COMPLIANCE WITH SUCH INDI-

CATIONS MIGHT LEAD TO EVEN

SERIOUS DANGERS.

1.1 Introduction

Thank you for preferring this wheel balancer. We feel
sure you will not regret your decision.
This machine has been designed for use in profes-
sional workshops and stands out for its reliability
and easy, safe and rapid operation. With just a small
degree of maintenance and care, this wheel balancer
will give you many years of trouble-free service and
lots of satisfaction.

LIBRAK380.3DTEC - LIBRAK380P.3DTEC - LIBRAK430.3DTEC - LIBRAK430P.3DTEC

1297-M021-1_B

2.0 INTENDED USE

The machines models

LIBRAK380.3DTEC -

LIBRAK380P.3DTEC - LIBRAK430.3DTEC -

LIBRAK430P.3DTEC

, and relative versions, are

wheel balancers for car and light transport, pro-
jected to be used exclusively to cancel out, or at
least reduce to acceptable limits the vibrations of
the wheels, by fitting counterweights of suitable size
and in specific positions to the same wheels that are
not correctly balanced.

THIS MACHINE MUST BE USED

STRICTLY FOR THE INTENDED

PURPOSE IT WAS DESIGNED FOR

(AS INDICATED IN THIS MANUAL).

THE MANUFACTURER CANNOT

BE HELD RESPONSIBLE FOR ANY

DAMAGE CAUSED BY IMPROPER,

ERRONEOUS, OR UNACCEPTABLE

USE.

AN INTENSIVE USE OF THE EQUIP-

MENT IN INDUSTRIAL ENVIRON-

MENT IS NOT RECOMMENDED.

2.1

Staff training

The machine may be operated only by suitably

trained and authorized personnel.

Given the complexity of the operations necessary to
manage the machine and to carry out the operations
safely and efficiently, the personnel must be trained
in such a way that they learn all the information
necessary to operate the machine as intended by the

manufacturer.

A CAREFUL READING OF THIS

INSTRUCTION MANUAL FOR

USE AND MAINTENANCE AND A

SHORT PERIOD OF TRAINING

WITH SKILLED PERSONNEL CAN

BE AN ENOUGH PREVENTIVE

PREPARATION.

«
...
6
7
8
9
10
...
»

Содержание LIBRAK380.3DTEC




































































































Отзывы:

Нет отзывов