INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 15 of 61
EN
9.2.3 Monitor fitting
1. Remove the nuts (
Fig. 7 ref. 1
) and the washers
(
Fig. 7 ref. 2
) from the bolts (
Fig. 7 ref. 3
). Fit
the support pipe (
Fig. 7 ref. 4
), turned by 90°,
and pay attention to the monitor and keyboard
cables (
Fig. 7 ref. 5
) inside it. Insert the guard
monitor(
Fig. 7 ref. 6
) into the monitor support
(
Fig. 7 ref. 4
). Into the support pipe (
Fig. 7 ref. 4
),
fit the monitor support (
Fig. 7 ref. 7
) and lock it
through the nut (
Fig. 7 ref. 8
). Then screw the
previously removed nuts and washers again.
Fig. 7
2. Connect the plugs on the power supply sockets and
monitor signal. Connect the wiring of the keyboard.
3. Secure the monitor (
Fig. 8 ref. 1
) to the support
(
Fig. 8 ref. 2
) with the bolts (
Fig. 8 ref. 3
) and the
washers (
Fig. 8 ref. 4
) supplied.
Fig. 8
4. Mount the guard (
Fig. 9 ref. 1
) to the support
(
Fig. 9 ref. 2
) with the 6 bolts (
Fig. 9 ref. 3
) and
the washers (
Fig. 9 ref. 4
) supplied.
Fig. 9
LIBRAK350 - LIBRAK350PRO
1296-M024-01
